DropIT! | OBD V1

Plug in. Drop. Done.

The easiest way to lower your OEM air suspension while parked.

In cooperation with DropIT! Engineering, we have adapted the OBD concept specifically for modified air suspension setups with Drøpd components.

The DropIT! x descend OBD module is simply connected to your vehicle's OBD interface. No installation, no additional air lines and no complicated setup.

Plug it in – the automatic lowering process starts – front first, followed by the rear.

After the lowering process, the module can simply be unplugged again.

Features:

• Plug & Play via OBD – simply plug it in and the drop begins
• No additional hardware on the air suspension
• No coding required
• Specifically adapted for modified air suspension setups
• Stop function: A short tap on the brake stops the lowering process
• Simply unplug after use

Venting time:

• Front axle: approx. 50 seconds
• Rear axle: up to 80 seconds

The times are deliberately calibrated for use with modified air suspension setups and Drøpd components.

With a short tap on the brake, you also have the option to stop the lowering process of the currently active axle at any time.

Who is the OBD module for?

OBDump is the right choice for anyone who wants to lay down their vehicle simply and effortlessly.

No installation. No wiring. No additional air lines.

Simply connect it to the OBD interface in the footwell and your vehicle will automatically lower itself.

The module is deliberately designed for simple operation.

OBD V1 vs. QuickDump

You want it as simple as possible? → OBD V1
You want maximum speed and maximum drop? → QuickDump

The OBD module works via the existing suspension control system and therefore takes significantly longer than our QuickDump Dropbox. The achievable final height may also be slightly higher with OBD V1, depending on the vehicle and setup.

In return, the installation is unbeatable in terms of simplicity:

Plug in the OBD. Start the drop. Done.

Scope of delivery:

• DropIT! x descend OBD module
• Quick-start guide

Available module variants:

• C7: Audi A6/S6/RS6 & A7/S7/RS7: 2011-2018
• D4: Audi A8 S8: 2010-2017
• C8: Audi A6/S6/RS6 & A7/S7/RS7: 2018-2024
• D5: Audi A8/S8: 2017-2024
• FY: Audi Q5/SQ5: 2016-2024
• 4M: Audi Q7/SQ7 & Q8/SQ8/RSQ8: 2015-2026

→ Check for SFD2 diagnostic protection on model year 2023 and newer.
DropIT! V1 is not compatible with vehicles equipped with SFD2/UNECE diagnostic protection. PR codes for SFD2: NI1, NI7, NI8 or NI9

👉 User Manual

Note:

For show purposes only – not approved for use on public roads.